Products List

MORE+

Contact Us

MORE+
  • SKYPE£º
    summerlee7384

  • EMAIL£º
    summer@sunrisescn.com
  • MSN£º
    summer7384@hotmail.com
  • PHONE£º
    0086-769-23156709

Press

MORE+

Press

Nav£ºHome - Press

Factory Hot Sell Powder Brake PB series

Views£º43 Date£º2019/4/2 Font size£º14px 12px

High Quality 24V DC Shaft Factory Hot Sell Powder Brake PB series



Magnetic Powder Brake Notes

 

1. Don¡¯t overload, meanwhile cool to appropriate temperature

 

The value of the torque/rotational speed/slip power should be less than the rated value. The cooling mode(natural cooling/forced air cooling/water cooling) should depend on the maximum slip power when it works and the cooling air should pass the water and oil filter. The temperature detector and the alarm should be installed to prevent high temperature which can affect the service life of the magnetic powder.(the highest temperature is 80 degree). #magneticpowderbrake

 

2. Concerning the service life

 

The life of the magnetic powder clutch and brake rely on the life of the magnetic powder. Generally speaking, its service life is 4500-7500 hours in the state of non-overloaded; but its service life can extend several times in some cases, such as: the working torque of the magnetic powder clutch/brake, relative slip rotational speed and slip power can be reduced to 50%-70% of the rated value. This is to say, the margin can be enlarged as soon as possible when designing.#


Factory Hot Sell Powder Brake PB series

Factory Hot Sell Powder Brake PB series

Qrcode